The front panel user interface is simple and easy to use, enabling virtually any user to quickly learn and operate the Edge FX. The display guides the user through the printing process to ensure error-free output. The Edge FX features a network-friendly Ethernet connection to maximize data throughput and versatility.
The Edge FX is designed to interface with either a direct connection to the computer or with a network connection through a network hub or switch. Jobs can be sent using Gerber ’s Omega design and production software or third party software packages.
The Edge FX is one component in Gerber’s Matched Technology System, a complete print-to-cut solution.
With the addition of a Gerber sprocketed plotter, shops now have a completely integrated system that registers the cut pattern to the print exceptionally well.
Gerber offers a broad selection of rugged and reliable cutting plotters to meet virtually every shop requirement. After printing, operators simply load the materials into the cutting plotter, register using the tool provided, and contour cut with speed and accuracy. If you want to laminate before you cut, no problem, we provide a wide range of laminates for a variety of applications, and Gerber cutters do a great job cutting through the laminates as well as the materials.
Due to the separate but integrated printer and cutter, this print-to-cut workflow speeds production and improves quality and consistency.
Gerber Ribbons/Foils Provide Exceptional Color Range
| The terms "foil" and "ribbon" can be used to interchangeably. To find out more about how thermal printing works click here... |
Although the FX is a single-color-at-a-time printing solution, there is a hugh selection of colors to choose from.
Most label applications only require one or two colors, so the FX is a perfect fit.
The Edge FX employs an advanced color foil system that utilizes over 60 base colors from which to choose. With that many base colors to start from, the user can mix colors to match virtually any color. The Omega design program allows the user to type in industry standard Pantone™ colors, which will in turn tell the user what colors are needed to match that specific color.
Operators can rapidly insert and remove the foil assembly without lifting the cover via a slide-in door on the side of the unit.
The GerberColor FX foil cartridge assembly consists of a re-useable Edge FX foil caddy and removable foil insert. Foil refills are easily inserted into the caddies. The Edge FX and GerberColor foil system features intelligent RFID (radio frequency identification) technology to accelerate production and help prevent costly errors. An RFID tag is included with each foil insert and contains color and foil ID information.
Gerber Ribbons Use RFID Technology
An RFID reader/writer device is integrated into the printer, which acts as a Smart GerberGauge™ by continually updating the tag with the foil length remaining on the roll.
During jobs, the Edge FX compares the foil ID and actual roll length to the job requirements and notifies the operator of any discrepancies.
If the incorrect foil is loaded, the Edge FX allows the user to replace the foil or make an on-the-fly substitution so jobs quickly continue to print with an alternate foil. In the Continuous Print Mode, the Edge FX recognizes the foil present and begins printing immediately upon insertion, providing rapid production with minimal operator intervention. |
