Convex Information

Call us at 800 • 232 • 8018

Tamper-evident Security Polyester and Destructible Reflective Vinyl

Trying to remove a tamper evident MiniVoid™ label bridging the cover on a machine.

Labels printed on MiniVoid™ tell a story. They produce evidence that someone has tried remove the label.

The film is brite white and only destructs when tampered with. It prints very well with Thermal Transfer printers such as the GERBER EDGE®, MATAN, and Roland printers.

Once MiniVoid™ is applied to a surface and allowed to cure for 48+ hours, if you try to remove it, the label will delaminate leaving the word "VOID" on the surface (pictured above). You can try to put the label back down, but it will never look the same again. It is tamper evident on both the label and the surface the label was on.

In comparing MiniVoid™ to the chrome silver material that has a large 1" word "VOID", MiniVoid™ has a much smaller 3/8" "VOID" that is just as evident, but much more frequent for smaller labels and asset tags. And of course white is more visible than chrome on darker surfaces.

MiniVoid™ is currently available in 15" punched for the Gerber and 12" for the Matan Spring.
Other sizes can be cut.

Call for our Specialty Product Order Form
800-232-8018

If you are looking for destructible film (film that won't come off)...

Try our destructible reflective material. It's great for warning labels on equipment, where it is imperative that it is not removed. In the picture above, they used it for the Serial Number label to the right of the MiniVoid™ label.

Peace of Mind:
End users and manufacturers feel safe & confident knowing their warning labels will last long and are extremely difficult to remove. This keeps their liability down.

GMS Destructible Reflective vinyl is specially formulated for the GERBER EDGE® and other Matan Thermal printers. However other formats can be made available. This reflective sheeting has a 7 year outdoor life when vertically exposed and properly processed and applied. Once applied, the vinyl cannot be removed in one piece.

Use GMS Destructible Reflective Vinyl for applications such as safety markings, warning labels and other times where liability will increase if the label is removed.

Email us for more information.